Occupational health and safety with ohss.ie

Navigation: Main page » Health and Medical

 Print this page Submit articleComment article

The Ultimate Facebook Marketing Guide
Hey there, Ever want to know how to get a lot more people interested in buying your products and services with Facebook? I know I have, but it’s never been easy to understand. Until now. Check this video out to see what I mean: Amy Porterfield is the co-author of “Facebook Marketing All in One For Dummies” and in this video she show you how simple it is to: •Get more fans interested in your products/services •Turn average fans into Super Fans •Make those Super Fans become customers for life •And a lot more... Watch this video to hear what all the rave is about for this training: You don’t want to miss out on learning how to maximize Facebook... take action now and watch this video:

Author: Ohss ie

The exposure monitoring requirements in the asbestos regulationa, as with other Occupational health and safety training, Health standards, require the employer to monitor employee exposures initially and routinely so that appropriate hazard control measures are implemented and maintained to protect the employees.

Employee exposure is measured by collecting representative air samples whose aggregate sampling time is as close as possible to the employee's full work shift, not to exceed 8 hoursExposure monitoring samples must be analysed by Phase Contrast Microscopy (PCM) in accordance with the Safety Health and Welfare at Work (Exposure to Asbestos) Regulations, 2006 Asbestos Location and Condition Surveys.

Under current legislation (Safety, Health and Welfare at Work (Construction) Regulations 2006) there is a duty on employers to identify any Asbestos Containing Material (ACM) before commencing demolition, building maintenance or removal works. When working at a third party’s workplace, employers and contractors must obtain information from the owner regarding ACM. If there is any doubt as to the presence of ACM, then legislation requires that the employer take the necessary steps to identify the presence of ACM.

OHSS is accredited by the Irish National Accreditation Board (INAB) to undertake inspection surveys of asbestos in buildings and for the analysis of asbestos in materials. In line with legislation, we offer 3 levels of Asbestos Location and Condition Surveys:

* All surveys are carried out in accordance with MDHS 100 and HSG 248 â€" recognised in Ireland as best practice from the Health and Safety Executive in the UK.

* All our surveyors are trained to BOHS P402 or higher standards with extensive experience throughout the industry.

Survey Type 1:

Location and Assessment Survey (Presumptive Survey)

The purpose of the Type 1 survey is to locate, as far as reasonably practicable, the presence and extent of any suspect asbestos containing materials in the building and assess their condition. An experienced, well-trained surveyor, familiar with the range of asbestos products, can usually, by inspection alone, say that a material can be ‘presumed’ to contain asbestos.

However, it is much more difficult for surveyors to presume that some materials do not contain asbestos. Many materials such as vinyl floor tiles have exactly the same appearance whether they contain asbestos or not.

A Type 1 survey may well list many materials that are presumed to contain asbestos that would be eliminated from the asbestos register by laboratory analysis of representative samples of the materials. This survey essentially defers the need to sample and analyse for asbestos (or the absence thereof) until a later time prior to any disturbance of the material by demolition, alteration or maintenance.

The duty holder bears the potentially significant additional costs of management for some non asbestos containing materials. Our experience suggests the additional cost of management of the non asbestos containing materials usually outweighs the additional cost of a Type 2 survey with representative sampling of such materials for laboratory analysis.

All areas are accessed and inspected as far as reasonably practicable (e.g. above false ceilings and inside risers, service ducts, lift shafts, etc) or where not accessible will be presumed to contain asbestos. Any material which can reasonably be expected to contain asbestos will be presumed to contain asbestos, and where it appears highly likely to contain asbestos, there will be a strong presumption that it does.

Survey Type2:

Standard Sampling, Identification and Assessment Survey (Sampling Survey)

The purpose and procedures used in this survey are the same as for Type 1, except that representative samples are collected from suspect ACMs and analysed for the presence of asbestos in order to confirm or refute the surveyor’s judgment.

If the material sampled is found to contain asbestos, other similar homogeneous materials used in the same way in the building can be strongly presumed to contain asbestos.

Less homogeneous materials will require a greater number of samples. The number should be sufficient for the surveyor to make an assessment of whether asbestos is or is not present.

We always recommend Type 2 surveys as the additional cost of representative sampling means the duty holder has a definitive report on all accessible asbestos containing materials.

This means the non asbestos materials determined from laboratory analysis can be eliminated from the management plan, reducing the cost of future management arrangements.

Contact us:

Unit 2 Beat Centre,
Stephenstown Industrial Estate,
Balbriggan,
Co. Dublin,
Tel: 01 6905907,
Fax : 01 8020439,
Email : info@ohss.ie,
Web : www.ohss.ie